Beam550 Aquila Kit(Kit Only, Blue Canopy)
BEAM Aquila (550 class) Basic Package.
- High Quality!! Include Switch Main(553) & Tail Blade(86mm) -
- Kit Features-
553mm Main blade for 550 class Flybarless Helicopter.
Very light!! Flight weight of 3 kg, includes the battery(6S 5000mAh).(Excluding the battery, Kit and parts / Canopy 2.25 Kg).(Excluding the battery, Kit and parts / Canopy 2.25 Kg)
As the aircraft becomes lighter, the battery charge is reduced and the desired manuever is possible at low RPM.
Very light!!But it's not weak!! With a compact airframe design, light weight and airframe stiffness all at once.
Convenience!! The power connector that was hanging messy on the rugged aircraft inside the frame is in the frame.
You can attached the connector without removing the canopy.
Beam Made!!Metal work own production.
All alluminum parts are made after precision CNC machining using 100% domestic high grade aluminum (AL6061) material.
● Flybarless System Head.
● 0, 12, -12 pitch guidelines.
● Turnbucle pitch control load.
● Precision CNC machining, Swash Assembly.
● Precision Injection herringbone main gear .
● Precision Injection belt Pully .
● Power Connector XT 150 Mount applied.
● Carbon landing gear.
● Precision CNC machining, luxurious post-processing frame metal parts.
● New design FRP Canopy(Green & Blue Canopy).
●Switch Blade, high quality Main Blade(553mm) / Tail Blade(86mm) basic configuration
● Precision CNC machining, two pieces tail case & housing
● Apply the metal control lever.
● Paste a neon sticker into a landing skid & tail vertical pin.
- Detailed Picture-
● Blue Painted Canopy
● FlyBarless Head System.
● Precision CNC machining, metal head parts
● Applied pitch guidelines.(0, +12, -12)
● Power Connector, XT 150 Mount.
● Carbon landing skid & high-grade neon orange color sticker .
● Precision injection herringbone main gear & belt pulley .
● Precision CNC machining , metal frame parts .
● Precision CNC machining, metal swash servo mount parts .
● Precision CNC machining, metal tail parts .
● Precision CNC machining, metal tail control load mount .
● Precision CNC machining, metal tail control lever & acetal bushing .
● Tail Vertical pin & Advance neon color Sticker .
● Length - 1100mm
● Height - 280mm
● Main rotor diameter : 1260mm(553mm blade)
● Main gear : 120T(0.8M)
● Tail pulley : 38T
● Tail gear ratio: 1:4.2
● Weight : 2,250g
- Required Electronics Guidelines-
● 6S 5000mAh ~ 6000mAh Battery
● This Swash Servo (3EA) & Tail Servo can be used for 550 size
helicopter and above.
● This BLDC Motor is used for 550 class and above helicopter (6S,
Shaft Size 6mm) ESC (100A or higher) .
● 3-axis gyro
- This product is a a basic package only including the tail and main blade and the electronics required for the flight must be purchased separately.