Beam 550 Aquila Combo Kit, Blue canopy (E5.5-001)

Beam550 Aquila Combo Kit

Beam550 AQUILA Kit.

- Swash Servo -

-Excellent tail control performance !! Beam 615MG Tail Servo included -

    - Speed : 0.053sec(6.0V), 0.04sec(8.4V)

    - Torque : 5.71kg.cm(79.29oz/in)(6.0V), 7.22kg.cm(100.25oz/in)(8.4V)

    - Frequency : 760Pulse, 560hz

- Motor -

- Excellent stability !! Hobbywing 100A ESC included -

- High quality!! Switch Main Blade(553mm) & Tail Blade(86mm) included -

   - Kit Feature -

  553mm Main Blade is suitable for  550 Class Flybarless Kit.

  Very light!!  Battery(6S 5000mAh ) included flight weight 3Kg.(Battery excluded, Kit/canopy 2.25Kg)

  When the kit is lighter, the burden on the battery is reduced and the desired start is possible with low RPM.

  Very light !! but not weak!!  With a compact Kit design, light weight and Kit stiffness at once..

  Convenience!! Inside the frame, a power connector that was hanging dirty on the hanging kit..

  You can attach the connector without removing the canopy.

Beam Made!! Metal work own production.

 All aluminum parts are made after precision CNC machining using 100% domestic high grade aluminum (AL 6061) material.

   ● Flybarless System Head.

   ● 0, 12, -12 pitch guidelines.

   ● Turnbuckle pitch control Load.

   ● Precision CNC machining, Swash Assembly.

   ● Precision Injection herringbone main gear.

   ● Precision Injection  belt Pully.

   ● Power Connector XT 150 Mount applied.

   ● Carbon Landing gear.

   ● Precision CNC machining, luxurious after-treatment frame metal parts.

   ● Newly designed FRP Canopy(Green & Blue Canopy).

   ● Switch Blade, high quality Main Blade(553mm) / Tail Blade(86mm) basic configuration.

   ● Precision CNC machining, two pieces tail case & housing.

   ● Metal control lever application.

   ● Landing skid &Tail Vertical Pin neon Sticker applied.

- Detail photo -

   ● Green Painted Canopy

   ● Blue Painted Canopy

   ● Flybarless Head System.



   ● Precision CNC machining, metal head parts.

    ● Precision CNC machining, metal tail parts.

    ● Precision CNC machining, metal tail control load mount.

    ● Precision CNC machining, metal tail control lever & acetal bushing.

    ● Tail Vertical pin & Advance neon color Sticker.

   ● Length - 1100mm  

   ● Height - 280mm  

   ● Main rotor diameter: 1260mm(553mm Blade)

   ●  Tail pulley: 38T

   ●  Tail gear ratio: 1:4.2 

   ●  Weight : 2,250g

- Basic setting guide -

   ●  Required Battery capacity(size) :  6S 5000mAh ~ 6000mAh